Shop with Confidence
comodo

Newsletter Signup



BELOW COST SPECIALS!!!!

16" barrel, M4 - 6.8 SPC - WITH BOLT!

16" barrel, M4 - 6.8 SPC - WITH BOLT!

16" barrel, M4, 1-11" twist, 4140 Steel, button rifled, 6.8 SPC II caliber, with barrel extension, barrel extension pin, barrel nut,...
$129.00
Buy Now
A-AK Accessory Pack #1

A-AK Accessory Pack #1

AK Accessory LOT #1 consists of the following parts: QTY 2  AK Front sight Base QTY 5  AK Hammer, US Made QTY 3  AK Disconnector, US...
$69.00
Buy Now
A-AR Accessory Pack #1

A-AR Accessory Pack #1

AR Accessory LOT #1  consists of: QTY 3  FORGED, F Marked Front sight base, as pictured QTY 4  Trigger Locks QTY 2  Multi Tools...
$49.00
Buy Now
A-Galil Accessory Pack #4

A-Galil Accessory Pack #4

Galil Accessory pack includes the following: (see the individual listings for detailed descriptions of each) Gray cleaning kit x 2 Galil Bipod x...
$99.00
Buy Now
A-HK Accessory Pack #2

A-HK Accessory Pack #2

H&K Accessory LOT #2 This LOT includes the following: QTY  2  -  Genuine HK rear sight for G3 rifle.  Surplus, excellent...
$49.00
Buy Now
AK Disconnector, US MADE

AK Disconnector, US MADE

AK Disconnector, US Made, semi auto, 4140 steel hardened to Rc45
$5.00
Buy Now
AK Front sight base with bayonet lug, threaded 24mm

AK Front sight base with bayonet lug, threaded 24mm

AK Front sight base .573" ID with 24-1.5mm right hand threads and bayonet lug, stripped, no other parts other than the front sight base (no...
$45.00
Buy Now
AK Front sight base with bayonet lug, threaded 24mm LOT OF 10

AK Front sight base with bayonet lug, threaded 24mm LOT OF 10

AK Front sight base .573" ID with 24-1.5mm right hand threads and bayonet lug, stripped, no other parts other than the front sight base (no...
$350.00
Buy Now
AK Hammer, US MADE

AK Hammer, US MADE

US made AK hammer, semi auto, 4140 Steel hardened to Rc45.
$5.00
Buy Now
AK triggerguard and EXTENDED mag latch, complete set - LOT OF 5

AK triggerguard and EXTENDED mag latch, complete set - LOT OF 5

Brand new, parkerized steel, magazine latch set for AK and Galil.  This full set of all three peices (Triggerguard, magazine latch, and magazine...
$24.99
Buy Now
AK, Saiga feed ramp for 7.62x39, 5.45x39, and 5.56mm

AK, Saiga feed ramp for 7.62x39, 5.45x39, and 5.56mm

Feed ramp for Saiga rifle. This 4140 steel feed ramp is used to allow a Saiga rifle to fire from a standard AK 47 magazine. This feed ramp will work...
$15.00
Buy Now
AK, Saiga Handguard cap

AK, Saiga Handguard cap

Saiga handguard cap. This cap clamps on to the barrel of your Saiga (.675" diameter, you should measure your rifle because some Saigas vary),...
$25.00
Buy Now
AK, Saiga Receiver Plugs

AK, Saiga Receiver Plugs

Saiga receiver plugs. Use these polymer plugs to fill the holes in the receiver after you have moved the fire control forward. These plugs are made...
$1.00
Buy Now
AR bolt asembly, 6.8 SPC Caliber

AR bolt asembly, 6.8 SPC Caliber

Brand new bolt in 6.8 SPC Caliber, this assembly includes bolt, rings, extractor, extractor pin, extractor spring, ejector, ejector spring, and...
$30.00
Buy Now
AR bolt asembly, 6.8 SPC Caliber, LOT OF 10

AR bolt asembly, 6.8 SPC Caliber, LOT OF 10

Brand new bolt in 6.8 SPC Caliber, this assembly includes bolt, rings, extractor, extractor pin, extractor spring, ejector, ejector spring, and...
$200.00
Buy Now
AR cleaning kit, gray

AR cleaning kit, gray

Simple but effective cleaning kit for AR type rifles
$5.00
Buy Now
AR cleaning kit, gray, LOT OF 100

AR cleaning kit, gray, LOT OF 100

Simple but effective cleaning kit for AR or other type rifles.    
$200.00
Buy Now
AR cleaning kit, gray, LOT OF 20

AR cleaning kit, gray, LOT OF 20

Simple but effective cleaning kit for AR type rifles.   LOT OF 20
$60.00
Buy Now
AR FORGED front sight base, drilled, WITH Taper pins

AR FORGED front sight base, drilled, WITH Taper pins

Super quality, brand new, FORGED, "F" marked fronsight sight base for M16/AR15 rifles.  Parkerized finish, .750" ID, with...
$19.99
Buy Now
AR FORGED front sight base, WITH Taper pins - LOT OF 10

AR FORGED front sight base, WITH Taper pins - LOT OF 10

Super quality, brand new, FORGED, "F" marked fronsight sight base for M16/AR15 rifles.  Parkerized finish, .750" ID, with...
$99.99
Buy Now
AR Magazine, 5.56mm, 30 round, MIL SPEC

AR Magazine, 5.56mm, 30 round, MIL SPEC

Mil spec 30 round magazine, aluminum, with newest anti-tilt  follower, 5.56mm (.223 Rem).  These are NOT sone plastic, aftermarket mag,...
$12.00
Buy Now
AR Magazine, 5.56mm, 30 round, MIL SPEC, LOT OF 100

AR Magazine, 5.56mm, 30 round, MIL SPEC, LOT OF 100

Mil spec 30 round magazine, aluminum, with newest anti-tilt  follower, 5.56mm (.223 Rem).  These are NOT sone plastic, aftermarket mag,...
$900.00
Buy Now
AR multi tool, bar stock (not cast)

AR multi tool, bar stock (not cast)

Multi tool for AR15, heat treated tool steel includes barrel wrench, CAR buttstock wrench, flash hider wrench, 1/2" torque wrench connection,...
$18.00
Buy Now
AR multi tool, bar stock (not cast) LOT OF 10

AR multi tool, bar stock (not cast) LOT OF 10

Multi tool for AR-15, heat treated tool steel includes barrel wrench, CAR buttstock wrench, flash hider wrench, 1/2" torque wrench connection,...
$90.00
Buy Now
AR rail cover, 15 slots

AR rail cover, 15 slots

Synthetic rubber covers for a comfortable grip, can be cut for custom fit, covers 15 slots
$2.00
Buy Now
AR rail cover, 15 slots, LOT OF 100

AR rail cover, 15 slots, LOT OF 100

Synthetic rubber covers for a comfortable grip, can be cut for custom fit, covers 15 slots.   THIS IS NOT A MISPRINT!!!!!  $1 EACH!!!!!...
$50.00
Buy Now
AR Upper receiver, A3, POLYMER, lot of 10

AR Upper receiver, A3, POLYMER, lot of 10

Upper receiver, Carbon/Aramid receiver fits standard AR15 type parts, .250 pins. Carbon/Aramid material has a higher tensile strength than aluminum...
$400.00
Buy Now
HK MP5 Navy Grip housing, MADE in USA, LOT OF 100 SNP

HK MP5 Navy Grip housing, MADE in USA, LOT OF 100 SNP

Brand New, USA made stripped grip housing for MP5. Made for the ambi selector and features plastic housing with steel inserts. Can be used for both...
$150.00
... more info
Sold Out
HK MP5K Handguard, US Made

HK MP5K Handguard, US Made

Brand new, US Made handguard for the MP5K and clones.  Very high quality injection molded polymer with stop as pictured.  Great for...
$12.00
Buy Now
HK MP5K Handguard, US Made, LOT of 10

HK MP5K Handguard, US Made, LOT of 10

Brand new, US Made handguard for the MP5K and clones.  Very high quality injection molded polymer with stop as pictured.  Great for...
$60.00
Buy Now
HK MP5K Handguard, US Made, LOT of 100

HK MP5K Handguard, US Made, LOT of 100

Brand new, US Made handguard for the MP5K and clones.  Very high quality injection molded polymer with stop as pictured.  Great for...
$199.00
Buy Now
Mauser trigger assembly

Mauser trigger assembly

Excellent condition trigger assembly for '98 Mauser rifle.  Genuine military surplus.  Very high quality.  Includes trigger, sear...
$5.00
Buy Now
PAYMENT

PAYMENT

Payment for item that is not listed. Please note that each PAYMENT is worth $1.00 So if you wish to pay for something that costs $10.00 you would...
$1.00
Buy Now

Shopping Cart

Your cart is empty.
Copyright © 2017 Blackthorne Products. Responsive Zen Cart Template Designer Powered by Zen Cart