This COMPLETE PARTS KIT (less stripped lower receiver) has the following standard features:
M4 Feed Ramp barrel extension
T-Marked forged upper receiver
1-9" twist, 6 grooves, right hand
5.56mm chamber (shoot either 5.56mm or .223)
416R Stainless Steel Barrel
Naked stainless finished barrel
This 5.56mm caliber barrel is 20" long with a target crown and a correctly sized gas port for reliable function. The barrel is machined from 416R re-sulpurized stainless steel and hardened to a U.S. government Mil-spec of Rc 26-32. All external steel parts are coated in manganese phosphate IAW 126.96.36.199 of Mil-STD-171, the U. S. government's recommended protective finish for steel. This finish not only looks great, it affords complete corrosion protection. These barrels are of BULL contour (.950" under the handguards, .935 under the front sight base, .925" forward of the front sight base). This contour alleviates barrel whip and enhances accuracy in semi auto fire and helps dissipate heat. The barrel is button rifled with 6 grooves, right hand, 1 / 9" twist. The 1/9” twist is best because it handles the widest variety of ammunition and bullet weights.
The barrel is mounted on a FORGED A3 upper receiver with built in Mil-spec M1913 Picatinny accessory rail with the correct rail numbers engraved, made from certified 7075T6511forgings, hardcoat anodized IAW Mil Spec A8625, Type III, Class II, black per No. 37038, Table IX with nickel acetate seal, as per the Mil-spec. The upper features a forward assist and hinged ejection port cover.
This kit features an ultra slim (1.360" ID) KEYMOD handguard for a comfortable grip and easy and SECURE mounting of accessories. It has an integral full length M1913 Picatinny top rail and of KEYMOD mounting slots around the handguard. This handguard is machined from aircraft aluminum and hardcoat anodized IAW Mil Spec A8625, Type III, Class II, black per No. 37038, Table IX with nickel acetate seal, as per the Mil-spec and is massively machined with KEYMOD slots for efficient cooling and maximum adaptibilty. This handguard completely free floats the barrel. The carbine AR gas system is used with the gas block housed underneath the modular handguard.
The heavy duty 6 position buttstock comes standard. The buttstock tube is the mil spec thickness (1.145" OD). This kit comes with this stock (NOT the one in the picture) http://blackthorneproducts.com/cart/index.php?main_page=product_info&cPath=6_14&products_id=1370
All semi auto lower receiver parts are INCLUDED as well as semi auto bolt, carrier, and charging handle. The upper is COMPLETELY ASSEMBLED. Each and every part to the gun is included EXCEPT the stripped lower receiver! (A complete firearm is pictured, the lower receiver, sights, vertical grips, etc. and magazine, even though shown in the picture, are NOT included).
If you would like to upgrade to a FLUTED barrel, order the upgrade here:
If you would like to upgrade to a threaded muzzle with thread protector, order here:
You'll need some KEYMOD rail sections:
Don't forget the Mil Spec Aluminum, 30 round magazines:
If you would prefer a Mil Spec A2 (solid) stock, simply order item "AR-A2buttsub" on the SAME order as this kit. Here is the link: http://blackthorneproducts.com/cart/index.php?main_page=product_info&cPath=6_14&products_id=502
PLEASE NOTE: For CHROMED barrel interior and chamber, You must ACTUALLY Order part # AR-CHROME on your web order form, if you do not see it and it does not charge you $50 on your form, you have not ordered it and will not receive a chromed barrel. Do NOT just put it in the special instructions. Here is the link: http://blackthorneproducts.com/cart/index.php?main_page=product_info&cPath=0&products_id=300
Since this parts kit does not include the receiver, no FFL is required. Like all of our AR parts kits, this is MADE IN USA!
This product was added to our catalog on Saturday 30 April, 2016.