This COMPLETE PARTS KIT (everything except stripped lower receiver) includes the following features as standard:
M4 Feed Ramp barrel extension
1-9" twist, 6 grooves, right hand
5.56mm chamber (shoot either 5.56mm or .223)
11595E (SAE 4150) Barrel steel
Manganese Phosphate finish barrel
This 5.56mm caliber barrel is 8.5" long, threaded the standard 1/2 x 28 tpi with an A2 flash hider and the correct crush washer. The barrel is machined from chrome-moly, high vanadium steel and hardened to a U.S. government Mil-spec of Rc 26-32. The barrel, and all external steel parts, are manganese phosphate finished IAW 18.104.22.168 of Mil-STD-171, the U. S. government's recommended protective finish for steel. This finish not only looks great, it affords complete corrosion protection. The barrel is a mid-weight contour (tapered under the handguards, .750 under the front sight base) which alleviates barrel whip and enhances accuracy in semi auto fire and helps dissipate heat. The barrel is button rifled with 6 grooves, right hand, 1 / 9 twist. The 1/9 twist is best because it handles the widest variety of ammunition and bullet weights.
The barrel is mounted on a FORGED 7073T6 Aluminum upper receiver with the proper "T" position markings, hardcoat anodized IAW Mil Spec A8625, Type III, Class II, black per No. 37038, Table IX with nickel acetate seal, as per the Mil-spec. The upper features a forward assist and hinged ejection port cover.
This kit features an M-LOK handguard which makes attaching accessories a snap!
The 1.25" diameter buffer tube contains a standard carbine buffer and spring for reliable function and comes complete with a BLADE forearm stabilizer. This stabilizer adjusts via hex screws from 7.5" OAL to 11" OAL. This is an ATF approved pistol stabilizer that requires no additional paperwork. This system utilizes a 4-40 set screw to retain the rear takedown spring and lock plate is not needed. This screw is taped to the buffer tube - BE CAREFUL NOT TO LOSE IT!
All semi auto lower receiver parts are INCLUDED as well as semi auto bolt, carrier, and charging handle. The upper is COMPLETELY ASSEMBLED, and HEADSPACED. Each and every part to the gun is included EXCEPT the stripped lower receiver! (A complete firearm is pictured, the lower receiver and magazine, even though shown in the picture, are NOT included).
Don't forget the Mil Spec Aluminum, 30 round magazines:
PLEASE NOTE: For CHROMED barrel interior and chamber, You must ACTUALLY Order part # AR-CHROME on your web order form, if you do not see it and it does not charge you $50 on your form, you have not ordered it and will not receive a chromed barrel. Do NOT just put it in the special instructions. Here is the link: http://blackthorneproducts.com/cart/index.php?main_page=product_info&cPath=0&products_id=300
Since this parts kit does not include the receiver, no FFL is required. Like all of our AR parts kits, this is MADE IN USA!
This product was added to our catalog on Wednesday 28 August, 2019.