Shop with Confidence
comodo

Newsletter Signup



Upper Half, 16", A3, HBAR, FREE FLOAT - Slotted

  • Model: AR-UH16FF-Slotted
  • 34 Units in Stock

$229.00

Add to Cart:

This UPPER ASSEMBLY has the following standard features:

M4 Feed Ramp barrel extension
T-Marked forged upper receiver
1-9" twist, 6 grooves, right hand
5.56mm chamber (shoot either 5.56mm or .223)
11595E (SAE 4150) Barrel steel
Manganese Phosphate finish barrel

This 5.56mm caliber barrel is 16" long, threaded the standard 1/2 x 28 tpi, and has an A2 flash hider with the correct crush washer.  The barrel is machined from chrome-moly, high vanadium steel and hardened to a U.S. government Mil-spec of Rc 26-32. The barrel, and all external steel parts, are manganese phosphate finished IAW 5.3.1.2 of Mil-STD-171, the U. S. government's recommended protective finish for steel. This finish not only looks great, it affords complete corrosion protection. These barrels are of heavy dimension (.950 under the handguards, .750 under the front sight base).  This results in excellent heat dissipation and diminished barrel whip. The barrel is button rifled with 6 grooves, right hand, 1 / 9" twist.  The 1/9” twist is best because it handles the widest variety of ammunition and bullet weights.

The barrel is mounted on a FORGED A3 upper receiver with built in Mil-spec M1913 Picatinny accessory rail with the correct rail numbers engraved, made from certified 7075T6.511 forgings, hardcoat anodized IAW Mil Spec A8625, Type III, Class II, black per No. 37038, Table IX with nickel acetate seal, as per the Mil-spec. The upper features a forward assist and hinged ejection port cover.

 The barrel has a hardcoat anodized, machined aluminum, handguard that is slotted for heat dissipation and good looks.  It completely free floats the barrel for increased accuracy.  This configuration is excellent for use with optics because the low profile of the gas block does not interfere with your sight picture through the optics. 

If you would like to order a removable carry handle with match A2 sights installed, order one here:  http://blackthorneproducts.com/cart/index.php?main_page=product_info&cPath=6_14&products_id=800

PLEASE NOTE:  For CHROMED barrel interior and chamber, You must ACTUALLY Order part # AR-CHROME on your web order form, if you do not see it and it does not charge you $50 on your form, you have not ordered it and will not receive a chromed barrel. Do NOT just put it in the special instructions. Here is the link: http://blackthorneproducts.com/cart/index.php?main_page=product_info&cPath=0&products_id=300

Add a BOLT CARRIER GROUP if you need one. (You must ACTUALLY Order part #  AR-PA-8 for the BOLT CARRIER GROUP on your web order form and it must charge you for it, if you do not see it on your form, you have not ordered it and will not receive a  BCG. Do NOT just put it in the special instructions).  Here is the link:  http://blackthorneproducts.com/cart/index.php?main_page=product_info&cPath=0&products_id=168

Since this parts kit does not include the receiver, no FFL is required. Like all of our AR parts kits, this is MADE IN USA!

Ask a question



This product was added to our catalog on Thursday 20 October, 2016.

Shopping Cart

Your cart is empty.
Copyright © 2018 Blackthorne Products. Responsive Zen Cart Template Designer Powered by Zen Cart