Shop with Confidence
comodo

Newsletter Signup



Upper Half, 20", BULL STAINLESS - Slotted

  • Model: AR-UH20Vs-slotted
  • Shipping Weight: 1lbs
  • 63 Units in Stock

$329.00

Add to Cart:

This UPPER ASSEMBLY has the following standard features:

Feed Ramp barrel extension
T-Marked forged upper receiver
1-9" twist, 6 grooves, right hand
5.56mm chamber (shoot either 5.56mm or .223)
416R Stainless Steel Barrel
 

This 5.56mm caliber barrel is 20" long, with a target crowned muzzle, and a correctly sized gas port for reliable function.  The barrel is machined from 416R, re-sulpherized stainless steel and hardened to a U.S. government Mil-spec of Rc 26-32.  All external steel parts are manganese phosphate finished IAW 5.3.1.2 of Mil-STD-171, the U. S. government's recommended protective finish for steel. This finish not only looks great, it affords complete corrosion protection. These barrels are Bull barrel contour (.950 diameter under the handguards, .935 under the front sight base, .925 forward of the gas block) dimension their full length which alleviates barrel whip and enhances accuracy in semi auto fire and helps dissipate heat. The barrel is button rifled with 6 grooves, right hand, 1 / 9" twist.  The 1/9” twist is best because it handles the widest variety of ammunition and bullet weights.

The barrel is mounted on a FORGED A3 upper receiver with built in Mil-spec M1913 Picatinny accessory rail with the correct rail numbers engraved, made from certified 7075T6.511 forgings, hardcoat anodized IAW Mil Spec A8625, Type III, Class II, black per No. 37038, Table IX with nickel acetate seal, as per the Mil-spec. The upper features a forward assist and hinged ejection port cover.

 The barrel has a hardcoat anodized, machined aluminum, handguard that is slotted for heat dissipation and good looks.  It completely free floats the barrel for increased accuracy.

If you would like to upgrade to a FLUTED barrel,  order the upgrade here:  
http://blackthorneproducts.com/cart/index.php?main_page=product_info&cPath=0&products_id=299

If you would like to upgrade to a threaded muzzle with thread protector, order here:
http://blackthorneproducts.com/cart/index.php?main_page=product_info&cPath=6_15&products_id=1274

If you would like to order a removable carry handle with match A2 sights installed, order one here:  http://blackthorneproducts.com/cart/index.php?main_page=product_info&cPath=6_14&products_id=800

PLEASE NOTE:  For CHROMED barrel interior and chamber, You must ACTUALLY Order part # AR-CHROME on your web order form, if you do not see it and it does not charge you $50 on your form, you have not ordered it and will not receive a chromed barrel. Do NOT just put it in the special instructions. Here is the link: http://blackthorneproducts.com/cart/index.php?main_page=product_info&cPath=0&products_id=300

Add a BOLT CARRIER GROUP if you need one. (You must ACTUALLY Order part #  AR-PA-8 for the BOLT CARRIER GROUP on your web order form and it must charge you for it, if you do not see it on your form, you have not ordered it and will not receive a  BCG. Do NOT just put it in the special instructions).  Here is the link:  http://blackthorneproducts.com/cart/index.php?main_page=product_info&cPath=0&products_id=168

Since this parts kit does not include the receiver, no FFL is required. Like all of our AR parts kits, this is MADE IN USA!

 

Ask a question



This product was added to our catalog on Thursday 20 October, 2016.

Shopping Cart

Your cart is empty.
Copyright © 2018 Blackthorne Products. Responsive Zen Cart Template Designer Powered by Zen Cart