This UPPER ASSEMBLY has the following standard features:
M4 Feed Ramp barrel extension
T-Marked forged upper receiver
1-9" twist, 6 grooves, right hand
5.56mm chamber (shoot either 5.56mm or .223)
416R Stainless Steel Barrel
This 5.56mm caliber barrel is 16" long, with a target crowned muzzle, and a correctly sized gas port for reliable function. The barrel is machined from 416R, re-sulpherized stainless steel and hardened to a U.S. government Mil-spec of Rc 26-32. All external steel parts are manganese phosphate finished IAW 184.108.40.206 of Mil-STD-171, the U. S. government's recommended protective finish for steel. This finish not only looks great, it affords complete corrosion protection. These barrels are Bull barrel contour (.950 diameter under the handguards, .935 under the front sight base, .925 forward of the gas block) dimension their full length which alleviates barrel whip and enhances accuracy in semi auto fire and helps dissipate heat. The barrel is button rifled with 6 grooves, right hand, 1 / 9" twist. The 1/9” twist is best because it handles the widest variety of ammunition and bullet weights.
The barrel is mounted on a FORGED A3 upper receiver with built in Mil-spec M1913 Picatinny accessory rail with the correct rail numbers engraved, made from certified 7075T6.511 forgings, hardcoat anodized IAW Mil Spec A8625, Type III, Class II, black per No. 37038, Table IX with nickel acetate seal, as per the Mil-spec. The upper features a forward assist and hinged ejection port cover.
This kit features a M-LOK handguard with M-LOK mounting rows. M-LOK provides an extremely stable mounting platform for accessories. Additionally this handguard free floats the barrel for increased accuracy. The handguard is machined from aircraft aluminum and hardcoat anodized IAW Mil Spec A8625, Type III, Class II, black per No. 37038, Table IX with nickel acetate seal, as per the Mil-spec. It has the proper "T" marks on the built in, full length M1913 Picatinny top rail, and will accomodate most piston kits. It is also one of the narrowest and lightest M-LOK handguards on the market ( 1.35" ID). A standard length AR gas system with gas block is located under this handguard. The upper is fully assembled. Drop in your bolt/carrier and charging handle, check headspace and let her rip!
If you would like to upgrade to a FLUTED barrel, order the upgrade here:
If you would like to upgrade to a threaded muzzle with thread protector, order here:
PLEASE NOTE: For CHROMED barrel interior and chamber, You must ACTUALLY Order part # AR-CHROME on your web order form, if you do not see it and it does not charge you $50 on your form, you have not ordered it and will not receive a chromed barrel. Do NOT just put it in the special instructions. Here is the link: http://blackthorneproducts.com/cart/index.php?main_page=product_info&cPath=0&products_id=300
Add a BOLT CARRIER GROUP if you need one. (You must ACTUALLY Order part # AR-PA-8 for the BOLT CARRIER GROUP on your web order form and it must charge you for it, if you do not see it on your form, you have not ordered it and will not receive a BCG. Do NOT just put it in the special instructions). Here is the link: http://blackthorneproducts.com/cart/index.php?main_page=product_info&cPath=0&products_id=168
Since this parts kit does not include the receiver, no FFL is required. Like all of our AR parts kits, this is MADE IN USA!
This product was added to our catalog on Saturday 30 November, 2019.