Shop with Confidence
comodo

Newsletter Signup



.308 Caliber AR Parts Kit - 16", FF for DPMS

  • Model: AR10-RK16-FFL
  • 19 Units in Stock

$669.00

Add to Cart:

.308 (7.62 NATO) Caliber AR type Complete Parts Kit.

T-Marked forged upper receiver
1-10" twist, 6 grooves, right hand
7.62x51 Caliber (shoots either 7.62x51 or .308)
11595E (SAE 4150)Barrel steel
Manganese Phosphate finish barrel
Optional chrome lining

This 7.62x51mm caliber barrel is 16" long, threaded the standard 1/2 x 28 tpi, and has an A2 flash hider with the correct crush washer. The barrel is machined from chrome-moly, high vanadium steel and hardened to a U.S. government Mil-spec of Rc 26-32. The barrel, and all external steel parts, are manganese phosphate finished IAW 5.3.1.2 of Mil-STD-171, the U. S. government's recommended protective finish for steel. This finish not only looks great, it affords complete corrosion protection.   This barrel tapers under the handguard from 1.200" at the chamber to .950" at the gas block.  .750" through the gas block and .735" diameter forward.

The barrel is mounted on a FORGED 7075T6511 A3 upper receiver with built in Mil-spec M1913 Picatinny accessory rail, with the correct rail numbers engraved, hardcoat anodized IAW Mil Spec A8625, Type III, Class II, black per No. 37038, Table IX with nickel acetate seal, as per the Mil-spec. This upper has a hinged ejection port cover and a built in brass deflector.   Barrel nut threads are DPMS standard 1 7/16 - 16 TPI.  

This kit features a  rifle length handguard  knurled for sure grip. This handguard is machined from aircraft aluminum and hardcoat anodized IAW Mil Spec A8625, Type III, Class II, black per No. 37038, Table IX with nickel acetate seal, as per the Mil-spec. This handguard completely free floats the barrel,The carbine AR gas system is used with a gas block.

The heavy duty M4 buttstock (NOT the cheaper carbine buttstock) is adjustable to 6 positions for maximum shooter comfort and is of a reinforced "honeycomb" design for heavy duty use.  The buttstock tube is the mil spec thickness (1.145" OD) for the M4.

All semi auto lower receiver parts are INCLUDED as well as semi auto bolt, carrier, and charging handle. The upper is COMPLETELY ASSEMBLED. Each and every part to the gun is included EXCEPT the stripped lower receiver! (A complete firearm is pictured, the lower receiver,  and magazine, even though shown in the picture, are NOT, repeat NOT included.)

PLEASE NOTE:  For CHROMED barrel interior and chamber, You must ACTUALLY Order part # AR-CHROME on your web order form, if you do not see it and it does not charge you $50 on your form, you have not ordered it and will not receive a chromed barrel. Do NOT just put it in the special instructions.  If you just put AR-CHROME in the special instructions you will NOT receive a chromed barrel, it MUST be in the order form body and it MUST charge you $50.  Here is the link for AR-CHROME: http://blackthorneproducts.com/cart/index.php?main_page=product_info&cPath=0&products_id=300 This kit fits Gen 1 DPMS pattern .308 caliber lowers.

Since this parts kit does not include the receiver, no FFL is required. Like all of our AR parts kits, this is MADE IN USA!

Ask a question



This product was added to our catalog on Friday 12 February, 2016.

Customers who bought this product also purchased...

Shopping Cart

Your cart is empty.
Copyright © 2018 Blackthorne Products. Responsive Zen Cart Template Designer Powered by Zen Cart